Bay Technical Associates S2-RPC Specifications download pdf (Page 11)

Figure 11

CABLING

RJ-45 Cable

IMPORTANT: The BayTech unit has an RJ45 port, which uses an 8-pin rollover cable to

connect to the local EIA232 device, such as a computer terminal or external modem. For

those serial computers that do not have an RJ45 connection, an adapter is provided to

connect from a DE-9 connector to a RJ-45 connector, (see cable and adapter diagram). An

adapter to convert from a DB25 connector to an RJ45 connecter is also available from

BayTech, upon request. The 8-pin rollover modular cable is configured to operate with

either adapter.

CAUTION: All power should be removed from the BayTech unit prior to removing or

installing cables and /or adapters.

Network setup :

Ethernet Address................ 00:C0:48:00:01:FD

IP Address...................... 70.150.140.89

Subnet Mask..................... 255.255.255.224

Default Gateway................. 70.150.140.65

Connection Inactivity Timeout (mins): Disabled

Carriage Return Translation: Enabled

Break Length (msecs): 350

DHCP is Disabled Telnet is Enabled SSH is Enabled

SSH host keys are set to factory default

IP Address........................1

Subnet Mask.......................2

Gateway Address...................3

Inactivity Timeout................4

Carriage Return Translation.......5

Break Length......................6

DHCP Enable/Disable...............7

Telnet Enable/Disable.............8

SSH Enable/Disable................9

SSH Host Key Generation...........10

IP Filter Configuration...........11

SNMP Configuration................12

Web Server Configuration..........13

Exit..............................X,CR

Enter Request :

1 2 ... 6 7 8 9 10 11 12 13

No comments

Bay Technical Associates S2-RPC Specifications Page 11