OWNER'S MANUAL________________DS73 ETHERNET PERIPHERALCOMMUNICATIONS MODULEFOR THE DS-DATA SWITCHBayTech Manual Publication #U140A126
105.6 SECONDARY DNSType “6”(Secondary DNS) at the end of the main configuration menu to program the Secondary Domain NameServer(DNS). The DS73 will
115.11 MODULE NAMEType “11”(Module Name) at the end of the main configuration menu to program the DS73 module name. The modulename is the name repor
12Bay Technical Associates, Inc.PO Box 387, 200 N. Second StreetBay St. Louis, MS 39520 USAPhone: 228-467-8231 or 800-523-2702Web Site: www.baytech
136. Re-install the DS73 and apply power to the unit. The upgrade is now complete. Before you beginoperations, check the configuration status to
1412 DS73 MECHANICAL LAYOUT
1513 INDEX—A—Applications engineers, 11ARP, 6Authorized service agency, 12—C—Case sensitive, 11Class A digital device, 12Configuration, 8—D—Dial Prop
2
2Thank you for selecting a DS73 Ethernet Peripheral Communications Module for the DS Data Switch.The data provided in this Owner's Manual explai
3NOTE: The information contained in this document is subject to change without notice.Copyright 1997 by Bay Technical Associates, Inc.BayTech, Telpl
4TABLE OF CONTENTSTABLE OF CONTENTS ...
51 GENERAL INFORMATIONThe DS73 peripheral communications module supports remote access to TCP/IP Ethernet networks by using the DS-Series Data Switch
63 CABLING--10BASE-T CONNECTIONConnect a RJ-45 cable between the RJ-45 port and the network hub. The modular port is defined as DTE (i.e., Pin 1 isT
7c. Click-on “TCP/IP” settings. Enable the following settings when appropriate. Unique addresses can be selected depending on your specific appli
8Data Switch Series F.1.07Bay Technical AssociatesPort Select Code: $BTAttention Character: ;DS73 (2,1)... 1 Device A
95.1 MODULE IP ADDRESSType “1” (Module IP Address), at the end of the main configuration menu to program the IP address. The DS73 willrespond with:
Comments to this Manuals